Specs updated August 5, 2026
Blade
Inductrix BL
Brushless motor upgrade of Inductrix for improved performance and durability. More powerful than brushed version while maintaining small form factor. Ideal for indoor FPV racing with brushless power.
- MSRP
- $229
- Weight
- 45 g
- Rated flight
- 5 min
- Wind level
- 1/15
- Range
- 60 m
- Operating
- 10 to 35 °C
Modelled flight time by conditions
Physics-based estimates from the same engine as our flight-time calculator, at 50% humidity over flat, open terrain. No pilot safety margin is applied — manufacturer data is the baseline, derated for each condition. The model is explained in our methodology.
| Wind | 0°C | 20°C | 35°C |
|---|---|---|---|
| Calm | 4 min* | 4 min | 4 min |
| 10 mph* | 2 min** | 2 min* | 2 min* |
| 20 mph* | 2 min** | 2 min* | 2 min* |
| 30 mph* | 2 min** | 2 min* | 2 min* |
| Altitude (MSL) | Modelled flight time |
|---|---|
| 0 ft | 2 min* |
| 2,000 ft | 2 min** |
| 5,000 ft | 2 min** |
| 10,000 ft | 2 min** |
* Beyond a manufacturer's rated limit (wind, altitude) or outside the operating temperature range — shown for planning honesty, not as an endorsed operating condition. Beyond the wind rating the manufacturer's extreme-case time is shown; the model is not calibrated past that envelope. Altitude scenarios assume a sea-level launch site, where altitude MSL and AGL are equivalent; manufacturer altitude ceilings are quoted MSL. Estimates are modelled, not measured; always plan with a personal safety margin.